Home > Shop By Vehicle > Dodge Ram / Cummins > 2010-2012 6.7L Cummins > Dodge 2500/3500 >

Pusher 3.5" MEGA Intake Manifold 2007.5-2012 Dodge Cummins
Pusher 3.5" MEGA Intake Manifold 2007.5-2012 Dodge Cummins
 
Options:


Base Price $329.99




Powder Coat*:


PORTS*:


Description Technical Specs Frequently Asked Questions
 
Pusher 3.5" MEGA intake manifold for Cummins 6.7L turbo diesel engines in 2007.5-2012 Dodge Ram trucks.
Product Profile - 3.5" MEGA Intake Manifold
Pusher Install - 3.5" MEGA Intake Manifold for 6.7L Cummins Trucks
Features
  • All Pusher intake manifolds for the 2007.5-2012 Cummins 6.7L trucks are built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold.
  • With this vast improvement over the stock manifold you can expect quicker turbo spool, lower egt's, and less over all strain on your motor.
  • This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy.
  • You will need to delete all of your factory emissions equipment as this manifold does not have provisions to use any of it. This manifold is for off road use only.
  • For an additional charge, select powdercoating colors are available on this manifold.
  • Pair this manifold with the Pusher 3.5" intercooler tubes and CNC machined heater grid delete for even better airflow.

Average Customer Review: 5 of 5 Total Reviews: 14 Write a review.

  0 of 0 people found the following review helpful:
 
April 4, 2018
Reviewer: brian woods from colome, SD United States  
Very well made, easy install. Great Product!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Very happy customer! April 2, 2018
Reviewer: Dallas Anderson from Olds, AB Canada  
I recently installed my pusher intake, I wasn't sure how it would fit with a set of Dual CP3s but the fitment was perfect! Great detailed install instructions. Quick and easy install

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Major improvements December 14, 2017
Reviewer: Randy  
Super happy with your product. Big difference on the truck

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Outstanding!! July 27, 2017
Reviewer: C.L.E. from Fargo, ND United States  
Fantastic product, super fast shipping. Upon receiving my intake, the look exceeded my expectations. The install was even more impressive, fast and easy. The threaded ports sealed up perfectly for my boost gauge. Cannot say enough positive things about the service and product quality. Thanks again!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Pusher intake July 8, 2017
Reviewer: Mark Gonzales from El Paso tx United States  
Recently bought a pusher intake for my 2012 ram 3500 Paint and parts where in excellent condition performance works great got good throttle response

Was this review helpful to you?

View All Customer Reviews