Home > 2013-2016 6.7L Cummins >

Pusher 3.5" MEGA Intake System with Passenger-Side Intercooler Tube for 2013-2016 Ram Cummins
Pusher 3.5" MEGA Intake System with Passenger Side Intercooler Tube for 2013-2016 Dodge Cummins


 
Options:


Base Price $599.99



Powder Coat*:
   Check out the Powdercoat page to learn more about finishes.

Intercooler Configuration:
  

PORTS*:
  

Coupler Color:
  

Description Technical Specs Frequently Asked Questions
 
Pusher 3.5" MEGA Intake System for Cummins 6.7L turbo diesel engines in 2013-2016 Ram trucks.
Product Profile - 3.5" MEGA Intake Manifold
Features
  • Intake Manifold- the Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGT's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy. You will need to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it. This manifold is for off road use only. For an additional charge, select powdercoating colors are available on this manifold.

    Intercooler Tubes - the Pusher intercooler tubes are built around 3.5" mandrel bent tubing. These tubes help optimize your factory intake plumbing by replacing the stock 2.75" driver-side and passenger-side tube. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make installing these tubes extremely easy. When using this kit, you do not have to try and cut the factory steel bands off the factory tubes in order to reuse the factory boots. Just loosen the factory clamps and install the supplied parts. For an additional charge, select powdercoating colors are available on this manifold.

Average Customer Review: 4.5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Great product well made and true results August 2, 2017
Reviewer: michal adlof from blue ridge, TX United States  
Got it quick. Felt a good increase in throttle response. Customer service was great had a little bit of a hard time getting passenger pipe in place but after talking with pusher he explained an easier way than I was trying. Very well made product. Would recommend to anyone.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product and looks awesome also! May 12, 2017
Reviewer: kevin vaclavicek from 86 maple ave, new egypt, NJ United States  
The Pusher Intake manifold is an awesome looking performance add on. The truck accelerates much quicker and builds boost much quicker now all while keeping egt' s low.  Instructions were on point as well for installation.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent April 24, 2017
Reviewer: Micheal Harding from Reno , NV United States  
Powder coat looks great. Installation of the intercooler pipes is a little tricky by yourself. Definitely need two people! Intake manifold is beautiful and installs easy! Throttle response and turbo spool went way up. No increase in Turbo whistle though, was hoping for that!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2015 mega cab mega intake February 2, 2017
Reviewer: Cole Labeske from Ironwood, MI United States  
Great intake.  Fitment was very tight.  And looks clean. Notices much quicker spool.  Only issue was the powder coating.  I sprang the extra money to get the blue and it was some of the worst coating I've ever ever delt with.  It chipped very easy and scratches easier.  Lots of over spray inside the boost tubes.  Was pretty disappointed with that.  Save your money and bring them to a good local shop. But other than that great product and great people to deal with.  All in all i would highly recommend this product

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great service January 11, 2017
Reviewer: Jarion Sinkkanen from Harrisburg, PA United States  
Great service easy to use website...wish I could have found a discount code that worked but maybe a 2xl tshirt and we will call it good ;-)

Was this review helpful to you?