Home > Shop By Vehicle > Dodge Ram / Cummins > 1994-1998 12-Valve Cummins >

Pusher 3.5" MEGA Twin Intake System 1994-1998 Dodge Cummins 12v
Pusher 3.5" MEGA Twin Intake System 1994-1998 Dodge Cummins 12v

Base Price $699.00

Powder Coat*:


Coupler Color:

Description Technical Specs
Get the most air to your 12v head!
The Mega Twin in action on the first test drive of the Pusher SRT6.
The Pusher Mega Twin manifold is the only twin ram style manifold on the market with a 3.5" inlet. This allows the Pusher manifold to be fed with an additional 37.7% more air over any of the other twin ram style manifolds with their stock sized 3" inlets. To ensure our manifold gets that extra air, we supply a 3.5" boost tube and couplers to match the factory 3.5" inter cooler outlet. The Pusher Mega Twin 12v manifolds are hydro boost compatible and retain the factory fuel filter housing. Fully TIG welded, mandrel bent tubing, with 1/2" thick flanges, a 6061-T6 Aluminum 3/8" thick plenum plate, and 1/4" dipstick mount. All intakes come standard with two 1/8 inch NPT ports on the back for methanol/water injection, a boost gauge, etc. This intake kit comes with the manifold, a plenum plate, 3.5" driver-side intercooler tube, heavy duty 4-ply couplers, stainless T-bolt clamps, instructions, a factory Cummins gasket, factory Cummins bolts, and port plugs. For an additional charge, select powdercoating colors are available on this manifold.

Average Customer Review: 4.5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
Great product but expensive April 10, 2018
Reviewer: KH from Monument, CO  
I ordered the mega twin for my 96 12 valve. I had some questions and called in to pusher. The guys there are great and answered all my questions. The only problem I have is the price. I don't mind paying $700 for the intake but if I'm paying that much I shouldn't have to pay extra for powder coating. All in all happy with the intake... great quality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Mega Twin Cummings 12 valve July 13, 2017
Reviewer: Charlie Rios from Lompoc, CA United States  
Quality product, excellent workmanship performs as advertised and then some. The only change I'd make would be a bead roll instead of a flare on one end of the intermediate tube, tube to 45 degree elbow is a beast till you figure it out. Ol 12 valve gets with program.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
3.5" MEGA Twin Intake System 1994 Dodge Cummins February 28, 2017
Reviewer: Austin Day from Moscow, ID United States  
Amazing product, easy to follow installation instructions, high quality fabrication, very pleased with the performance, lower EGT's, quicker spool, and increased power.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
My truck runs so much better! June 8, 2016
Reviewer: Josh  
When I bought my intake for my 98 12 valve, I thought I would give pusher intakes a try and I was very happy I did. The quality of the kit goes unparalleled in my opinion the fitment was spot on and the quality of the powder coating and welds were amazing. I thought to myself wow the quality just can't be any better, the hundreds of hours this equipment must have taken in research and development is incredible! Jacob at pusher intakes has taken quality and customer service to a whole new level. Not only was the intakes gorgeous to the eye you could Tell the difference in the egt's  and overall performance this 12 valve had never had that kind of airflow before. In short pusher has hit a home run with this customer they provide  awesome customer support and an awesome product, they have won the consumers buisness for life.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
intake July 2, 2012
Reviewer: TD52 from Ferris, TX United States  
I have seen a lot of different types of intakes and the other one I was looking at was a main name GB .... but it was not what I was looking for in a intake ...
a good to excellent one should have a balance to the intake and also the ports added for NOX, CNG, propane, Water methane, Hydrogen and for meters also the powder coating can and should be used .... plus the option to get the custom color you want besides there standard colors you can have put on ... I went with blue in my wish list ... but may change to silver
also it will make sure you do not need the heater plate ... as long as you have a block heater you do not need that part
It also works with the power brake system most all of the others will not work with
It is good to see that there is a company with Engineers that know what they are doing ... and I am sure they will continue to expand on there line of products because they seem to know what the Diesel owner needs and wants

Was this review helpful to you?