Home > Shop By Vehicle > Dodge Ram / Cummins > 2007.5-2009 6.7L Cummins >

Pusher 3.5" MEGA Intake System 2007.5-2009 Dodge Cummins
Pusher 3.5" MEGA Intake System 2007.5-2009 Dodge Cummins
 
Options:


Base Price $429.99




Powder Coat*:

Check out the Powdercoat page to learn more about finishes.

Intercooler Configuration:


PORTS*:


Coupler Color:


Description Technical Specs Frequently Asked Questions
 
Pusher 3.5" MEGA Intake System for Cummins 6.7L turbo diesel engines in 2007.5-2009 Dodge Ram trucks.
Product Profile - 3.5" MEGA Intake Manifold
pusher Install - 3.5" MEGA Intake Manifold for 6.7L Cummins Trucks
Features
Intake Manifold- the Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGT's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a factory Cummins gasket and hardware to make installing this intake extremely easy. You will need to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it. This manifold is for off road use only. For an additional charge, select powdercoating colors are available on this manifold.

Intercooler Tube - the Pusher intercooler tube is built around 3.5" mandrel bent .060" thick tubing. This tube helps optimize your factory intake plumbing by replacing the stock 2.4" ID plastic tube. This kit also includes heavy duty 4-ply silicone couplers and stainless T-bolt clamps to make installing this tube extremely easy. When using this kit, you do not have to try and cut the factory steel band off your tube in order to save the factory boots. Just loosen the factory clamps and install the supplied parts. For an additional charge, select powdercoating colors are available on this manifold.

Average Customer Review: 5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Sweet Intake May 30, 2018
Reviewer: Todd Newman from Largo, FL United States  
Killer intake and the flow is great.  Big difference over the oem intake. Love the look as well!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome Product March 2, 2017
Reviewer: larry wilke from burbank, CA United States  
The Instructions could use a little improvement.  I think you should supply 35mm length bolts for all 6 not just the center. The stock are only 30mm and just don't get enough thread to feel comfortable.  Also let folks know that they can remove the temp sensor that was in the stock intake horn.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Outstanding February 7, 2017
Reviewer: Casey Cook from Jones, OK United States  
Excellent company here making great parts and actually keeping them affordable for the average joe unlike most every single other performance diesel parts company...

Was this review helpful to you?

  5 of 5 people found the following review helpful:
 
Great System February 6, 2017
Reviewer: Alex from Irvine, CA  
My system is working great in the truck. The elbow works great and was able to even purchase it painted.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
great kit May 13, 2013
Reviewer: LunchBox from new orleans, LA  
this kit is very straight forward and is easy to instal. everything is included, even the new gasket and port plugs (if you get the extra ports)

fit and finish is great. would definitely recommend this kit.

Was this review helpful to you?