Most aftermarket intercoolers are “drop in” replacements which means the inlet/outlet locations are the same as factory. The one thing you’ll want to determine is the outlet diameter of the intercooler and put that in the order notes box so we can send you the right size silicone couplers.
Yes, we designed the High Mount system to be compatible with this charge tube.
That depends. Drop in turbos in the stock location keep the compressor outlet in the same location as the factory charger the vast majority of the time. Turbo swap kits that use a 2nd gen style manifold move the turbo forward quite a bit, thus our off the shelf tube will not work. In this case we would have to custom build a tube just for you.
We recommend about an hour as its necessary to remove the cold air intake and in some cases the passenger side inner fender for better access during the install.
That depends on how much air you’re trying to move through it. The more air you’re moving the more power there is to be gained.