Home > Shop By Vehicle > Chevy Duramax > 2006-2007 LBZ Duramax >

Pusher SuperMax Intake System & Pusher Max 3" Driver-side Charge Tube for 2006-2010 Duramax LBZ/LMM Trucks
Pusher SuperMax Intake System & Pusher Max 3" Driver-side Charge Tube for 2006-2010 Duramax LBZ/LMM Trucks
 
Options:


This product is not emissions compliant. Off road use only.
Base Price: $864.98

Price with Selected Options: $864.98


Product Code: PGD0610SKT


Powder Coat*:

3 Parts3 Parts3 Parts3 Parts

PORTS*:


DESCRIPTION TECHNICAL SPECS FAQs
 
The ultimate way to save $35 and upgrade all of the anemic factory charge tubes, upper manifold, and two piece intake bridge to an unobstructed 3" flow path.

Compatible and highly recommended with the Pusher Max Compound Turbo System.
Pusher Product Overview - SuperMax Intake System for Duramax LBZ Trucks
Pusher Product Overview - Driver-Side Charge Tube for Duramax LBZ Trucks
FEATURES
Pusher SuperMax Intake System
  • The Pusher SuperMax Y-Bridge is a one piece Patent Pending true "Y" design that properly guides air into each cylinder head.
  • This system is 100% constructed of 3" mandrel bent tubing which supplies your engine with 93% more air and follows a 6% shorter flow path than the OEM parts being replaced.
  • Fully TIG welded with precise settings to produce beautiful welds and optimal penetration without impacting air flow.
  • CNC machined flanges for flawless mounting to your Duramax engine.
  • These parts are compatible with the Pusher Max Compound Turbo System for the LBZ trucks.
  • Included are all of the HD 4-ply silicone couplers, stainless T-bolt clamps, o-ring gaskets, hardware, and even wire loom for a complete install - if you have previously not done an EGR delete, you will need a EGR Cooler Bypass Kit as well.
  • Additional options include various powder coat colors and extra ports.
Pusher Max 3" Driver-side Charge Tube
  • The Pusher Max 3" Driver-side Charge Tube is engineered to provide your engine with 86.4% more air via mandrel bent tubing that follows a 9% shorter and more efficient flow path and eliminates the problematic curved factory coupler at the intercooler inlet.
  • Fully TIG welded with precise settings to produce beautiful welds and optimal penetration without impacting air flow.
  • Includes heavy duty 4-ply silicone couplers and full stainless T-bolt clamps.
  • Eliminates the problematic curved factory coupler at the inter cooler inlet.
  • Does not rub on the driver-side inner fender or any other engine bay components like other designs tend to do.
  • Additional options include various powder coat colors.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 35 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 100 October 26, 2020
Reviewer: NICHOLAS MEDINA from wauchula, FL United States  
Great fit and great quality

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 2007 2500 LBZ October 11, 2020
Reviewer: Joe from riverside, CA United States  
I was very happy with my intake setup i ordered from pusher. I originally ordered the wrong parts and they allowed me to return them for a full refund and helped get me the right parts for my truck, even though it was totally my fault and it was a few months later( I ordered the parts for a LLY by mistake). Great customer service! The Y-Bridge was difficult to install (I did it without removing the turbo) but totally worth while, the look under the hood is very clean and although I did this at the same time as a few other mods I was very happy with the increase in performance and fuel mileage.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Purchasing Customer September 24, 2020
Reviewer: HAMPTON CHEVROLET JETT BODY SHOP from HAMPTON, VA United States  
Absolutely incredible Service and Item.  Arrived on time and looked amazing, very pleased with product.  Will purchase more items from this manufacturer in the future.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fits great, performs extremely well August 25, 2020
Reviewer: Anonymous Person from Spokane Valley, WA United States  
Used for a customer who was having EGT control issues. Fit extremely well and noticed a HUGE drop in EGTs immediately upon install, with only thing that changed was this y bridge and both IC pipes. Highly recommend

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Intake kit July 6, 2020
Reviewer: Carlea Carlson from Mossyrock, WA United States  
Everything fit perfect. Tech support was great do to no instructions.

Was this review helpful to you?

View All Customer Reviews