Home > Shop By Vehicle > Dodge Ram / Cummins > 2003-2007 24-Valve Cummins >

Pusher High Mount Compound Turbo System for 2003-2007 Dodge Cummins Trucks
Pusher Intakes High Mount Compound System Ram Cummins Truck
 
Options:


Base Price: $2,150.00




Atmospheric Turbo:


Transmission Configuration*:


Powder Coat*:


Cerakote Ceramic Coating:


Exhaust Size:


Description Technical Specs Frequently Asked Questions
 
Pusher High Mount Compound Turbo System for 2003-2007 Dodge Cummins Trucks

Watch the Pusher High Mount Compound System be assembled in about two minutes.
Features
  • Supports up to 750HP with stock Holset charger and over 1000HP with upgraded chargers.
  • Compatible with most Borg Warner S400 frame chargers and stock based Holset chargers
  • CNC machined and laser cut flanges for flawless mounting to your Cummins engine
  • Fully TIG welded with precise settings to produce beautiful welds and optimal penetration without impacting air flow
  • The overall design and location of all components allows easy access and installation
  • Can be used with Pusher 3.5" Mega Passenger-Side inter cooler tube
  • Designed to work with stock and most "stock replacement" aftermarket exhaust manifolds
  • Full steel intermediate charge pipe with a port for a boost sensor
  • Front mount 5" Cold Air Intake with hidden sensor ports and massive Pusher 50 CAL Air Filter
  • The Intermediate Exhaust Pipe is routed for optimum exhaust flow with minimal impact to surrounding engine bay components and is hydro-formed to smoothly transition and match the S400 turbine inlet
  • Two-piece down pipe with Patent Pending smooth flow flange, allows for easy adjustment and fit up to the existing exhaust system
  • All fittings and oil/water lines are premium quality from well known manufactures
  • Heavy duty 4-ply silicone couplers and full stainless t-bolt clamps at every boosted connection
  • Extreme duty turbo mount proven to hold the S400 in place in any conditions
  • S400 charger is placed in the optimal location for optimal routing of every component in the system
  • Color matching 24"x36" high resolution "Anatomy of a Pusher Compound Turbo System" poster included with purchase
  • Does not require any welding, or major modification to the surrounding components in the engine bay. This is a truly bolt on system that can be installed in 4-8 hours depending on skill level and speed of work.
  • Included is every nut, bolt, hose, clamp, and even wire loom for a beautiful install
  • Various powder coat colors available
  • Installation of this kit is extremely easy, simply remove your existing cold air intake and down pipe then start bolting in parts.
  • Requires simple hand tools and basic mechanical knowledge for installation.
  • Included are extensive step by step instructions.
  • Average install time is 4-8 hours.
  • Please watch the Pusher Product Overview, Install, and In Action videos of this product.

Average Customer Review: 5 of 5 Total Reviews: 8 Write a review.

  0 of 0 people found the following review helpful:
 
Cummins High Mount Compound Kit for 2007 5.9L August 13, 2018
Reviewer: Richard G from Fort Lauderdale, FL  
Best experience ever! Kit came within 5 days of order, install was a breeze. Simple and easy to setup. Everything was provided. I have a stock manifold, I installed a 64mm turbo prior, and went with the S475 BG on top, with stock 4" downpipe coated. With just EFI Live Tuning from Hardway Performance, I am making close to 700hp, on stock fuel, cp3, injectors. Runs Awesome. Air before Fuel always! Trans is stock, but on borrowed time. Stock top end, no studs, springs, or pushrods. All in the tuning. Best kit ever, local made in Florida. Customer Service was awesome and thankful for the military discount. Pushing around 40-45psi of boost. Great Daily Driver and EGTs dropped. Very Quiet setup, the second turbo definitely muffles down the noise. Quieter than stock with a Donaldson Muffler and 5050xl resonator.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
2003-2007 Cummins High Mount April 12, 2018
Reviewer: Jared Wade from Spring , TX United States  
From my initial contact over the phone followed by multiple questions, the staff was knowledgeable, professional and patent in taking as much time as I needed. The product arrived in short order and I began following the bound color direction that are very clear and helpful. I did not have a single issue. All parts were installed as designed without clearance issues. I am running 100 hp over injectors with stock cp3; however, I pushed 60 psi total boost with 25lbs from my primary. By drive pressure was close to 1to 1 at 63. My truck runs much cooler and has immediate torque. Also, the 2nd turbo acts like a muffler, my truck is a bit quieter at this point. Overall, very well made products from high welds and powder coating to fit and finish. I am so happy with my purchase.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Customer service August 17, 2017
Reviewer: Terry Jones from Hedgesville, WV United States  
The fit and finish of the high mount add a turbo was as advertised. Followed the well laid out instructions and had it installed in no time. What impressed me the most was the customer service, I made several calls with questions and always was greeted with friendly and functional information. I would highly recommend Pusher intakes, great product and great people.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome quality and company! February 11, 2017
Reviewer: Earnest Warren from San Antonio, TX United States  
Bought my kit from Pusher. Everything was packaged as not to get damaged. Nice step by step instructions. My truck was fast already.... Wow pulling a trailer I easily have the power to cruise past people if needed. You will love the fit and finish..... 5 star product.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
03 common rail December 31, 2016
Reviewer: Jordan from Terre Haute, IN United States  
03 common rail with the afe stainless manifold and a custom agp turbo, kit is designed very well, had to tweek a few things to make it fit with the custom charger but Jacob at pusher is very knowledgeable and was a huge help just by the use of a few phone pictures emailed to him, with that said after the gate was set correctly, and playing with the smarty, the truck is a totally different animal with a incredible power band. Well worth the money.

Was this review helpful to you?

View All Customer Reviews