Home > Shop By Vehicle > Dodge Ram / Cummins > 2013-2018 6.7L Cummins >

Pusher 3.5" MEGA Intake Manifold + Lo-Pro Plus EGR Bypass for 2013-2018 Dodge 6.7L Cummins Trucks
Pusher 3.5" MEGA Intake Manifold  +  Lo-Pro Plus EGR Bypass for 2013-2018 Dodge 6.7L Cummins Trucks
 
Options:


Base Price: $524.98




Powder Coat*:


PORTS*:


Description Technical Specs Frequently Asked Questions
 
Combine, improve air delivery and save $35! This combo provides all of parts to bypass your EGR system in a super clean manner and replace the anemic factory intake manifold. This is the optimum, no "cut corners" way to give your truck some much needed additional air and clean up the engine bay in a big way.
Watch the Pusher High Mount Compound System be assembled in about two minutes.
Product Profile - 3.5" MEGA Intake Manifold + Lo-Pro EGR
Pusher Install - 3.5" MEGA Intake Manifold for 6.7L Cummins Trucks
Features
Intake Manifold- The Pusher Intake Manifold is built around a 3.5" inlet that smoothly transitions to two 3" mandrel bent tubes. This design also enabled the use of a short bolt in place of the long driver-side flange bolt that passes right through the center of the stock manifold air plenum. Thus freeing up airflow even more yet maintaining the stock six bolt pattern for a proper seal. The twin tube design nearly doubles the outlet size of the stock manifold while minimizing the impact of the initial section of the number one injector line. These design features amount to a 49.4% increase in flow over the factory manifold. With this vast improvement over the stock manifold you can expect quicker turbo spool, lower EGT's, and less over all strain on your motor. This manifold also includes instructions, a polished stainless dipstick mount, port plugs, a OEM gasket and hardware to make installing this intake extremely easy. You will need to delete all of your factory emissions equipment as the manifold does not have provisions to use any of it. This manifold is for off road use only. For an additional charge, select powdercoating colors are available on this manifold.
Individual EGR Bypass part overview- Coolant from the coolant riser is rerouted to the far back port of the cylinder head for better cooling via the Pusher coolant riser adapter and molded hose. Intake manifold block off plate and coolant riser adapter is fully machined 6061-T6 aluminum then finished in our trademark titanium anodizing to keep them looking great. The underside of the plate and the adapter utilize o-rings for a superior seal. Also machined into the plate is a boost sensor port. Exhaust manifold block off plates are stainless steel for superior corrosion resistance. The rear plate has a threaded port for easy installation of an EGT probe. Transmission dipstick tube bracket and drive pressure sensor bracket are stainless steel as well and keep both components close to the valve cover for a cleaner look while making room for different turbo configurations. Hoses are all premium quality and sourced from well known manufacturers. Works on cab and chassis models and trucks equipped with manual transmissions

Average Customer Review: 4.5 of 5 Total Reviews: 5 Write a review.

  0 of 0 people found the following review helpful:
 
Intake Manifold July 17, 2018
Reviewer: Richard Eason from Oakland Park, FL United States  
Looks awesome and sounds even better. However, instructions need to be more clear for the EGR bypass.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Top notch May 1, 2018
Reviewer: Charles  
The customer service was excellent. Answers to questions were more than fulfilled and the products were quality. Thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Super Happy January 19, 2018
Reviewer: Dustin Boise from Mesa , AZ United States  
I typically do not write reviews, but I had an awesome experience with Pusher.  Everything came ready to go with all materials necessary to complete the job.  Everyone I spoke with was extremely helpful and courteous.  I could not be happier with the products I bought and installed on my truck.  Not to mention, my items were delivered quickly.  I will definitely be ordering from them again soon!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good stuff November 6, 2017
Reviewer: Robert Cribbs from Leechburg, PA United States  
Everything fit Good and all the parts were there

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great Product and Great Company August 16, 2017
Reviewer: Mac from Bismarck, ND United States  
Last step to a full delete. I had some questions before I ordered and they were very helpful in answering them. The products showed up on time with all the hardware and no damage. One of the main reasons I went with the Pusher Intake was the clean look in offers and the numerous color options. (I chose Titanium) I dislike the in your face logos that other companies have on their intakes. Everything bolted up nicely, the longest part of the install was removing the factory components. Performance wise, the exhaust note sounds a little deeper. (In my opinion) Haven't had the truck loaded on any long hauls to comment on performance improvements.

Was this review helpful to you?